¶¶ÒõÊÓƵ

Gorilla Contact Adhesive Ultimate is an incredibly strong, permanent contact adhesive that resists heat and moisture. Our formula has an aggressive tack that can be used on a variety of materials and surfaces, both indoor and out. The adjustable anti-clog nozzle is easy to use and offers 3 ways to spray web pattern, for a narrower or wider application.

PRODUCT FEATURES

• PERMANENT BONDÌý– High Strength
• WEB SPRAY
• AGGRESSIVE TACK
• LOW VOCÌý– Meets CA CARB/OTC VOC requirements
• 3 WAYS TO SPRAYÌý– Adjustable nozzle
• RESISTS HEAT & MOISTURE
• MULTI-PURPOSEÌý
• BONDS: Heavy duty fabric, Car Headliners, Foam, Rubber, Felt, Cork, Ceramics, Laminate, Leather, Metal, Plastics*, Wood, Canvas & More

DIRECTIONS

• All surfaces should be clean and free of dirt, grease and oil. Protect surrounding areas from overspray to avoid residual adhesive.
• Shake can well before using.
• Adjust spray pattern width by turning spray tip to desired setting (Low-Med-High)
• Hold can in a vertical position 6 to 8 inches away from surfaces to be bonded and apply a uniform coat. Allow to dry to tack (approximately 1 minute) and press surfaces firmly together. Note: material is not repositionable.
• For Maximum Bond Strength: Spray both surfaces to be joined with multiple coats of adhesive and dry to tack (1-2 minutes, depending on thickness) before bonding. Apply firm pressure when joining. Note: porous surfaces will require more than one coat.
• To avoid possible clogging, turn can away from body, invert and spray a short jet to clear valve and spray tip.
• Note: If nozzle experiences a clog, actuate rapid short bursts until cleared.
  *Not recommended for polystyrene foam and unsupported vinyl. Certain plastics can experience bond failure due to plasticizer migration. Heat and humidity can affect dry time.